Brink Allure B16-25 HR (2100) Filter | Upflow | 531502
Brink Allure B16-25 HR (2100) filter | Upflow/ filter cass. side connection long
This set consists: of 1 filter - Size: 710 x 425 mm.
This wtw filter set is produced in-house by hq-filters.co.uk with the filter standard ISO 16890 , which is equal to the original filters.
With our own production, we can offer high quality product alternatives at attractive prices.
Suitable for: Brink Allure B16-25 HR (2100) upflow
Filter class: G3 - EN779:2012 | Iso coarse 50% - ISO 16890
ATTENTION!
IN THE CASE OF AN ALLURE DOWNFLOW, THE FILTER IS NOT IN THE UNIT.
This wire frame filter is in the bottom of the Allure B16-25 HR (2100) upflow and in the filter cassette side connection long.
Type: wire frame filter
Size: 710 x 425 mm.
Brand: hq-filters.nl
Brink no. 580522 - 531502
By purchasing these wtw filters, you bring fresh air from outside into your home. Good ventilation is important to maintain a home's indoor climate, but also to ensure that dust, dirt, bacteria and mould cannot accumulate in the ventilation system.
Regular filter changes mean significant energy savings.
The filter standard : EN799:2012 has been replaced since 1 July 2018 by the filter standard : ISO16890
Here, filters are classified into so-called ePM categories.
This classification gives an accurate indication of which particle sizes are filtered out of the air.
PM1 stands for all types of particulate matter smaller than 1 micron (μ = one thousandth of a millimetre):
PM1: 1μ = 0.001 mm
PM2.5: 2.5μ = 0.0025 mm
PM10: 10μ = 0.01 mm
The 'e' for PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Using these values, the standard now splits filters into four groups that filter different dust particles:
ISO Coarse < 50% (sand, lint, hair)
ISO ePM10 ≥ 50% (pollen, stone dust)
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
ISO ePM1 (combustion particles, nanoparticles, viruses)
For questions, suggestions or special filter requests, call 0513-648364 or email [email protected]
Frequently asked questions about ww filters can be found here
You can easily replace the WTW filters for the Brink Allure yourself and install them in your WTW unit
