Brink Elan 10 -2.0 | 532500
Suitable for: Brink Elan 10 -2.0 - Determine your own discount - You will receive 1 original Brink Elan filter
Read the full product description
Brink Elan 10 2.0 | filter - original
This set consists of: 1 filter - Individually packaged, Dimensions: 551 x 332 mm.
Suitable for: Elan 10 2.0
The serial number of the device begins with 005700xxxxxx.
Filter class: G3 - EN779:2012 | Iso coarse 50% - ISO 16890
Type: wire frame filter
Dimensions: 551 x 332 mm.
Brand: Brink
Brink no. 580850 - 532502 - 532500
By purchasing these heat recovery filters, you bring fresh air from outside into your home. Good ventilation is important for maintaining a healthy indoor climate, but also for preventing dust, dirt, bacteria and mould from accumulating in the ventilation system.
Regular filter changes mean significant energy savings.
The filter standard EN799:2012 has been replaced by the filter standard ISO16890 since 1 July 2018.
This classifies filters into so-called ePM categories.
This classification provides an accurate indication of the particle sizes that are filtered out of the air.
PM1 stands for all types of particulate matter smaller than 1 micron (μ = one thousandth of a millimetre):
-
PM1: 1μ = 0.001 mm
-
PM2.5: 2.5μ = 0.0025 mm
-
PM10: 10μ = 0.01 mm
The 'e' in PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Based on these values, the standard now divides filters into four groups that filter different dust particles:
-
ISO Coarse < 50% (sand, fluff, hair)
-
ISO ePM10 ≥ 50% (pollen, stone dust)
-
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
-
ISO ePM1 (combustion particles, nanoparticles, viruses)
You can easily replace the HRV filters for the Brink Elan yourself and install them in your HRV unit.
