Brink Elan 10 filter G3 | 531274

Suitable for: Brink Elan 10 filter G3 | 531274 - Determine your own discount - You will receive 1 Filter from our house brand hq-filters.co.uk - the most sold brand WTW filter

Read the full product description

Brink Elan 10 filter G3

This set consists of: 1 filter - Dimensions: 510 x 410 mm.

This heat recovery filter set is produced in-house by hq-filters.nl in accordance with filter standard ISO 16890, which is equivalent to the original filters.
Our in-house production enables us to offer high-quality product alternatives at attractive prices.

Suitable for:

• 004700 Elan 10 without display
• 0049xx Elan 10 with display

Filter class: G3 - EN779:2012 | Iso coarse 50% - ISO 16890

Type: wire frame filter

Dimensions: 510 x 410 mm.

Brand: hq-filters.nl

Brink no. 531274

The filter standard: EN799:2012 has been replaced by the filter standard: ISO16890 since 1 July 2018.
This classifies filters into so-called ePM categories.
This classification provides an accurate indication of the particle sizes that are filtered out of the air.

PM1 stands for all types of particulate matter smaller than 1 micron (μ = one thousandth of a millimetre):
PM1: 1μ = 0.001 mm
PM2.5: 2.5μ = 0.0025 mm
PM10: 10μ = 0.01 mm
The 'e' in PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.

Based on these values, the standard now divides filters into four groups that filter different dust particles:
ISO Coarse < 50% (sand, fluff, hair)
ISO ePM10 ≥ 50% (pollen, stone dust)
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
ISO ePM1 (combustion particles, nanoparticles, viruses)

You can easily replace the HRV filters for the Brink Allure yourself and install them in your HRV unit.