Brink Flair 300 / 400 filter set - 2 pieces | G4+G4 | 245×510 mm | House brand
ISO Coarse 60% (G4) filters for Brink Flair 300/400 WTW units. Set of 2 coarse filters - economical choice with fast delivery via WTW-Filtershop.co.uk.
Read the full product description
Filter set for Brink Flair 300/400 – G4 coarse filter
This set fits the Brink Flair 300 and Flair 400 heat recovery units. It is a coarse filter (ISO Coarse) that traps dust and dirt, allowing your heat recovery unit to run quietly and efficiently. Often searched for as Brink Flair 300 filter and filters Brink Flair 300.
Summary
- ✅ ISO/EN: ISO Coarse 60% (G4 – EN 779:2012)
- ✅ Set contents: 2 coarse filters
- ✅ OEM size: 245 × 510 mm
- ✅ Brink item number: 532716
- ✅ Material: synthetic fibre, low resistance
- ✅ Replacement recommendation: every 6 months on average
Compatibility
Suitable for the Brink Flair 300 and Brink Flair 400 series (same filter size). To be sure, check the type plate or the size in the manual. This way, you can be sure that the Brink Flair 300 filter also fits your appliance. This product corresponds to OEM part number 532716.
Replacing Brink Flair 300 filters: how to do it
- Switch off the unit and open the service hatches.
- Remove the old filters from the slots and clean the area.
- Slide the new set into the guides (arrow = airflow direction).
- Close the flap and switch the unit back on. Then reset the filter notification via the control panel.
Tip: set a reminder so you don't forget to replace your Brink Flair 300 filters on time. This will maintain air quality and prevent unnecessary energy consumption.
Which filter class should I choose?
This G4 coarse filter protects the unit against dust and coarse particles. Do you want extra protection against pollen and fine dust? Then combine this coarse filter with a fine dust filter (ePM class). In our explanation, you can read about the difference between ISO 16890 classes and the old EN designations: Filter classes explained.
Frequently asked questions
Does this filter also fit the Brink Flair 400?
Yes. The Flair 300 and 400 use the same filter size (245 × 510 mm). Always check the label in the unit.
Can I combine this coarse filter with a fine dust filter?
Yes, you can. For cleaner supply air, choose an ePM filter in addition to G4. This is especially useful if there is pollen or more fine dust around the home.
How often do I need to replace it?
On average, twice a year. More frequent replacement may be necessary in case of renovation, pets or high dust levels. This applies to all heat recovery filters and heat recovery units.
Ordering & delivery
In stock and shipped quickly. Can't find your size or set among the options? Feel free to contact us – we will help you make the right choice.
Upgrade: ePM1 (F7) fine dust filter
Would you like cleaner supply air in addition to device protection? Then choose the matching ePM1 fine dust filter (≈ F7) for the Brink Flair 300/400. This class blocks a large proportion of fine particles, such as pollen and traffic dust, while maintaining high air permeability. Use the fine dust filter together with this coarse filter as a duo, or switch between them depending on the season. View the product here: Flair 300/400 fine dust filter ePM1 (F7).
Extra maintenance tip
Check visually for contamination on a monthly basis. During renovations or in the pollen season, a Brink Flair 300 filter can fill up more quickly; in that case, replace Brink Flair 300 filters sooner than the average six months. This will keep Brink Flair 300 filters effective and your ventilation unit running quietly, economically and hygienically.
