Original Brink Renovent Excellent 300/400 Filters | Filter class G3 | Set of 2 filters
Filter set consisting of 2 (OEM) original filters for Brink Renovent Excellent 300 / 400. Filter class G3
Read the full product description
Original Brink Renovent Excellent 300 / 400
This set consists of: 2 filters
The serial number of your device begins with 4100xxxxxxxx 4110xxxxxxxx 4200xxxxxxxx 4210xxxxxxxx
Filter class: G3 - EN779:2012 | Iso coarse 50% - ISO 16890
Type: wire frame
Dimensions: 525 x 185 x 5 mm.
Brand: Brink Climate Systems
Brink no. 535014 - 531770 - 580594
Purchasing these heat recovery filters brings fresh air from outside into your home. Good ventilation is important for maintaining a healthy indoor climate, but also for preventing substances, dirt, bacteria and mould from accumulating in the ventilation system.
Regular filter changes result in significant energy savings.
The filter standard: EN799:2012 has been replaced by the filter standard: ISO16890 since 1 July 2018.
This classifies filters into so-called ePM categories.
This classification provides an accurate indication of the particle sizes that are filtered out of the air.
PM1 stands for all types of particulate matter smaller than 1 micron (μ = one thousandth of a millimetre):
-
PM1: 1μ = 0.001 mm
-
PM2.5: 2.5μ = 0.0025 mm
-
PM10: 10μ = 0.01 mm
The 'e' in PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Based on these values, the standard now divides filters into four groups that filter different dust particles:
-
ISO Coarse < 50% (sand, fluff, hair)
-
ISO ePM10 ≥ 50% (pollen, stone dust)
-
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
-
ISO ePM1 (combustion particles, nanoparticles, viruses)
You can easily replace the heat recovery filters for the Renovent Excellent yourself and install them in your heat recovery unit.
