Brink Flair 450/600 | 532812 | original F7 filters
Brink Flair 450/600 - Determine your own discount - You will receive 1 piece original (OEM) F7 filter - ePM1 50%
Read the full product description
Brink Flair 450/600 | 532812 | F7
Original Brink Flair filter set
This set consists of: 1 filter
The serial number of your device begins with 432xxxxxxxxx (Flair 450) or 433xxxxxxxxx (Flair 600)
Filter class: F7 - ePM1.0 - 50% - ISO 16890
Type: compact filter
Dimensions:
Brand: Brink Climate Systems
Brink no. 532812
Purchasing these heat recovery filters brings fresh air from outside into your home. Good ventilation is important for maintaining a healthy indoor climate, but also for preventing dust, dirt, bacteria and mould from accumulating in the ventilation system.
Regular filter changes result in significant energy savings.
The filter standard EN799:2012 has been replaced by the filter standard ISO16890 since 1 July 2018.
This classifies filters into so-called ePM categories.
This classification provides an accurate indication of the particle sizes that are filtered out of the air.
PM1 stands for all types of particulate matter smaller than 1 micron (μ = one thousandth of a millimetre):
-
PM1: 1μ = 0.001 mm
-
PM2.5: 2.5μ = 0.0025 mm
-
PM10: 10μ = 0.01 mm
The 'e' in PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Based on these values, the standard now divides filters into four groups that filter different dust particles:
-
ISO Coarse < 50% (sand, fluff, hair)
-
ISO ePM10 ≥ 50% (pollen, stone dust)
-
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
-
ISO ePM1 (combustion particles, nanoparticles, viruses)
You can easily replace the HRV filters for the Renovent Flair yourself and install them in your HRV unit.
