Original Brink Flair 450/600 | G4 Filters | 532821
Filter set consisting of 2 original (OEM) filters for Brink Flair 450/600. Filter class G4 - ISO Coarse 60%.
Read the full product description
Brink Flair 450/600 | 532821 | G4|G4
Original Brink Flair filter set
This set consists of: 2 filters
The serial number of your device begins with 432xxxxxxxxx (Flair 450) or 433xxxxxxxxx (Flair 600)
Filter class: G4 - EN779:2012 | Iso coarse 60% - ISO 16890
Type: wire frame
Dimensions: 195x595x5 mm
Brand: Brink Climate Systems
Brink no. 532821
Purchasing these heat recovery filters brings fresh air from outside into your home. Good ventilation is important for maintaining a healthy indoor climate, but also for preventing dust, dirt, bacteria and mould from accumulating in the ventilation system.
Regular filter changes mean significant energy savings.
The filter standard EN799:2012 has been replaced by the filter standard ISO16890 since 1 July 2018.
This classifies filters into so-called ePM categories.
This classification provides an accurate indication of the particle sizes that are filtered out of the air.
PM1 stands for all types of particulate matter smaller than 1 micron (μ = one thousandth of a millimetre):
-
PM1: 1μ = 0.001 mm
-
PM2.5: 2.5μ = 0.0025 mm
-
PM10: 10μ = 0.01 mm
The 'e' in PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Based on these values, the standard now divides filters into four groups that filter different dust particles:
-
ISO Coarse < 50% (sand, fluff, hair)
-
ISO ePM10 ≥ 50% (pollen, stone dust)
-
ISO ePM2.5 ≥ 50% (mould spores, toner dust)
-
ISO ePM1 (combustion particles, nanoparticles, viruses)
You can easily replace the HRV filters for the Renovent Flair yourself and install them in your HRV unit.
